Belangrijkste Eigenschappen
| HF/50MHz Flagship Base Station | 
| 200 watts output from 50V FET Push-pull PA stage | 
| +40dBm Intercept Point RX | 
| Main RX - Down Conversion on all bands 270Hz/500Hz/2.7kHz/6kHz/15kHz Roofing Filters | 
| Sub RX - Down Conversion on 15/20/40/80/160M bands (as TS-590S RX) 500Hz/2.7kHz Roofing Filters | 
| 2 x TFT Colour Display screens | 
| 3 x DSP Processors | 
| Built-in RTTY/FSK/PSK/QPSK Decoder/Encoder. | 
| 4 x SO-239 Antenna sockets plus RCA jacks for RX-only antenna input and external RX out. "Antenna Name" display function for the 4 SO-239 ports | 
| Connectivity:- 10MHz Ref Clock I/O (BNC), External ATU port, Keyboard In, COM Port (Female 9-pin), Straight Key, Paddle/external Keyer, 2 x USB-A & 1 x USB-B ports, "ACC-2" Data/audio connector, "Remote" linear connector, analogue Meter Jack 3.5 mm, "DRV" low-level LF drive, Optical SP-DIF I/O, 2 x external speaker sockets, DVI-I Dual-link video port, LAN port | 
Geleverd met
| AC Mains Cable | Ja | 
| Zekering | Ja, 1 x 4A | 
| Handleiding | Ja, Includes Circuit Diagram | 
| Line Filter | Ja | 
| Plugs | Ja, 1 x 7-pin DIN 1 x 13-pin DIN | 
Algemene Eigenschappen Radio Amateur
| 10 MHz Reference I/O Port | Ja, Selectable as Off, Input or Output. Impedance = 50Ω. Input level = 0dBm ± 10dB. Output Level = 0dBm | 
| "Band Elimination Filter" | Ja, Offers selectable-width notch function (300-1200Hz in 100Hz steps) with selectable attenuation (20 - 80 dB in 20 dB steps) | 
| Built-in CW Keyer with Message Memories | Ja | 
| Built-in Power Supply | Switched Mode PSU | 
| Built-in Voice Guide and Recorder | Yes. Fully configurable guidance including operating status, SWR, TX power, menus. | 
| Interne klok | Ja, Two clock displays (local/time-zone) plus date. Can be updated from NTP servers via the LAN port | 
| COM Port - D-sub 9-pin | Ja | 
| Connectivity | 10MHz Ref Clock Oscillator I/O (BNC) External ATU port Keypad (3.5 mm jack) COM Port (Female 9-pin) Straight/Paddle Key/External Keyer (6.3mm jack) 2 x USB-A & 1 x USB-B ports "ACC-2" Data/audio connector "Remote" linear connector Analogue Meter (3.5mm jack) "DRV" low-level LF drive (RCA) Optical I/O 2 x external speaker sockets (3.5mm jacks) DVI-I Dual-link video port LAN port | 
| Connector for External ATU | Ja | 
| Connector for Remote/Linear Amp | Ja | 
| CTCSS Encoder/Decoder | Ja, Single-tone and cross-tone functions | 
| Data Connection for External TNC | Ja | 
| Digital Noise Limiter | Ja | 
| Digital Optical Ports | Ja, Input = 44.1/48kHz 16/24-bit Output = 48kHz 24-bit | 
| Dimmer Key | Yes - for displays and LEDs. 4 dimmer levels | 
| Direct-access Band Buttons | Ja, 10 buttons for Amateur bands 1.8 - 50 MHz plus 2 buttons for General Coverage. Up to 5 band-memories per button | 
| Direct Frequency Entry | Ja | 
| "DRV" Low Level Drive Output Terminal | Ja, RCA jack - 1 mW output covers 1.8 to 50 MHz bands plus the 135.80-137.70 kHz LF band. | 
| Dual Receive | Ja | 
| DSP Devices | 3 x Analog Devices Inc SHARC 32-bit DSP chips for Main IF, Sub IF and Bandscope functions | 
| DX Cluster Tune Function | Ja, With compatible external Kenwood transceiver | 
| Firmware Upgradeable via PC | Ja | 
| Firmware Upgradeable via USB Port | Ja | 
| Front Panel KeyPad | Ja | 
| FSK Reverse Mode | Ja | 
| Headphone Socket with Dual RX Output | Ja, Main and sub-Band RX audio can heard either mixed, or separated to the left/right channels | 
| High Frequency Stability | Ja | 
| Illuminated Front Panel Keys | Ja | 
| Key Beep | Yes - adjustable + OFF | 
| Toetsvergrendeling | Ja | 
| LAN Port | Ja | 
| Loudspeaker Socket | Two external loudspeakers can be connected via 2 x 3.5mm mono sockets.  Impedance range 4 - 8 ohms | 
| Memory Channel Lock-out | Ja | 
| Memory Channels with Alpha-tagging | 120 Geheugenkanalen | 
| Memory Shift Function | Ja | 
| Menu System for individual set-up | Ja, Switchable between CONFIG A and CONFIG B. Can also be saved to USB stick | 
| Microphone Socket | 8-pin "Chrome" type | 
| Monitor Function | Ja | 
| Multiple Scan Functions | Ja | 
| Mute Function | Ja | 
| PC Radio Control Program (Option) | Ja | 
| Opstarttekst | Ja | 
| Power-Off Timer | Configurable, including Timed Audio Recording | 
| Pre-amplifier | Ja, Configurable per band | 
| Pre-selector | Ja, Configurable | 
| Programmable Function Keys | Ja, 2 Front Panel PF keys plus up to 8 external/mic keys | 
| PSK31 Compatible | Ja | 
| Receiver Hi-cut/Lo-cut DSP Slope Filters | Ja | 
| Receiver Noise Blanker | Ja | 
| Receiver Notch Filter Function | Ja | 
| Remote Operation via the Internet | ARHP-990 Software allows remote operation | 
| Roofing Filter | Equipped with 270Hz, 500Hz, 2.7kHz, 6kHz and 15kHz as standard, plus space for optional 6th filter | 
| Screen Saver | Ja, Configurable - two styles including 10-character text for callsign, name etc. | 
| Sky Command 2 | Ja, With compatible external Kenwood transceiver | 
| Speech Processor | Ja | 
| Sub Receiver | Ja, Equivalent to TS-590S main receiver | 
| TFT Colour Display | Ja, 2 TFT displays. 7" main display with operating information, Bandscope, Waterfall and touch-screen tuning function plus 3.5" sub display with audio scope, PSK tuning meter etc. Selectable background colours. 4 different styles of S-meter presentation. Sub-display includes X-Y function (FSK) or Vector function (PSK) | 
| Time-out timer | Ja | 
| Transverter Display Function | Yes - direct entry of transverter frequency | 
| TX Audio Filter | Ja | 
| TX Functions | Speech Processor (Adjustable In/Out Levels). Changeable TX Filter Bandwidth. TX Audio Monitor. TX DSP Equalizer. VOX (Adjustable Gain and Delay Time settings). MIC Gain Control. CAR Level Setting. Adjustable Power Output. | 
| TX/RX Equalizer | Ja | 
| Type USB poort | Ja, 2 x USB-A for flash drives/keyboard plus 1 x USB-B for PC connectivity | 
| Variable LCD Brightness with Selectable Dimmer | Ja, Four configurable settings | 
| Video Display Port | Ja, DVI port. Selectable 800x600 or 848x480 resolution | 
| VOX | Ja, Separately configurable for voice (SSB, FM & AM) or Data Mode. Adjustable Gain, Delay and Anti-VOX | 
Amateur HF Specificaties
| HF Output Power | 200 W SSB/FM/CW/FSK, 50 W AM | 
| 50 MHz RF Output Power | 200 W SSB/FM/CW/FSK, 50 W AM | 
| 5 W Minimum Output for QRP operation | Ja | 
| A.C. Supply Voltage | 220 - 240 V (50/60 Hz) | 
| Antenna Impedance - 50 Ohm | Ja | 
| Antenna Tunable Range (160 - 6 m Bands) - 16.7 Ohm to 150 Ohm | Ja | 
| Audio Output Impedance - 8 Ohm | Ja | 
| Audio Output Power | More than 1,5 W (8 Ohm, 10% distortion) | 
| Continuous RX: 30 kHz - 60 MHz | Ja, Within spec - 0.13 - 30 MHz & 50 - 54 MHz | 
| Current Drain (approx.) | TX - 840 VA Power Consumption RX - 200 VA Power Consumption | 
| Frequency Stability | ± 0.1 ppm 0 °C to +50 °C | 
| Microphone Impedance - 600 Ohm | Ja | 
| Modes | A1A (CW), A3E (AM), J3E (SSB), F3E (FM), F1B (FSK) & G1B (PSK) | 
| Notch Filter Attenuation | Auto Mode - More than 60 dB Manual Mode - More than 70 dB | 
| Operating Temperature Range | -0 °C to + 50 °C | 
| Receiver Beat Elimination | Meer dan 40 dB | 
| Receiver Circuitry | Main RX - Double superheterodyne Sub RX1 Down Conversion - Double superheterodyne Sub RX2 Up Conversion - Triple superheterodyne | 
| Receiver Frequency Range | VFO Coverage = 30kHz - 60MHz Main Band spec guaranteed = 0.13 - 30MHz/50-54MHz | 
| Receiver IF Rejection Ratio | Less than 70dB | 
| Receiver Image Rejection Ratio | HF - Less than 70dB 50MHz - Less than 60dB | 
| Receiver Intermediate Frequencies | Main RX - 1st IF 8.248 MHz/2nd IF 24 kHz (FM - 455 kHz) Sub RX1 Down Conversion - 1st IF 11.374 MHz/2nd IF 24 kHz Sub RX2 Up Conversion - 1st IF 73.095 MHz/2nd IF 10.695 MHz/3rd IF 24 kHz (FM - 455 kHz) | 
| Receiver Selectivity | SSB (LO:200/HI:2800 Hz) - More than 2.4 kHz @ -6 dB/Less than 4.4 kHz @ -60dB CW/FSK/PSK (Width: 500 Hz): More than 500 Hz @ -6 dB/Less than 1.2 kHz @ - 60 dB AM (LO:100/HI:3000 Hz) - More than 6 kHz @ -6 dB/Less than 12 kHz @ -60dB FM - More than 12 kHz @ -6 dB/Less than 25 kHz @ -50dB | 
| Receiver Sensitivity - 0.13 - 0.522 MHz | SSB/CW/FSK/PSK = less than 0.5µV AM = less than 6.3µV | 
| Receiver Sensitivity - 0.522 - 1.705 MHz | SSB/CW/FSK/PSK = less than 4µV AM = less than 32µV | 
| Receiver Sensitivity - 1.705 - 24.5 MHz | SSB/CW/FSK/PSK = less than 0.2µV AM = less than 2µV | 
| Receiver Sensitivity - 24.5 - 30 MHz | SSB/CW/FSK/PSK = less than 0.13µV AM = less than 1.3µV | 
| Receiver Sensitivity - 28 - 30 MHz (FM) | Less than 0.22µV | 
| Receiver Sensitivity - 50 - 54 MHz | SSB/CW/FSK/PSK = less than 0.13µV AM = less than 1.3µV FM = less than 0.22µV | 
| RIT Frequency Range | ± 9,999 kHz | 
| Transmitter Carrier Supression | Less than -60 dB | 
| Transmitter Frequency Response | 300 Hz - 2700 Hz (within -6 dB) | 
| Transmitter Modulation | SSB/FM/AM = Balanced/Reactance/Low Power | 
| Transmitter Spurious Radiation | Less than -60dB | 
| Transmitter Spurious Radiation - 50 MHz | Less than - 66 dB | 
| Transmitter Unwanted Sideband Supression | Less than -60dB | 
| XIT Frequency Range | ± 9,999 kHz | 
| Afmetingen | W x H x D = 460 x 182 x 449 mm including projections | 
| Gewicht | 24,5 kg | 
CW Features
| Auto-Weighting, with adjustable manual fixed ratios | Ja | 
| Built-In Memory Keyer | Ja | 
| CW Autotransmit | Ja | 
| CW Autotune | Ja | 
| CW Pitch Control | Ja, Adjustable 300 - 1100Hz | 
| CW-Reverse Mode | Ja | 
| Full Break-In/Semi Break-In | Ja | 
| Iambic Modes A and B Built-in | Ja | 
| Microphone Paddle Mode | Ja | 
| Paddle Reverse Function | Ja | 
| Side Tone Monitor | Ja | 
| Terminal for CW paddle key | Ja | 
| Terminal for straight key/external electronic keyer | Ja | 
Opties
| External Loudspeaker | Ja, SP-990 | 
Applicable Standards
| CE Marked | Ja | 
| R&TTE: 1999/5/EC | Ja | 
| Factory Quality Certification and Location | ISO 9001. Manufactured in Japan | 




 
							
